LEED Silver hospital -are there any useful suggestions that will safeguard this installation from potential failure for at least 10 years?

Prior to installing 50,000 square feet of recycled rubber flooring on the concrete slab of my client’s new LEED Silver hospital, are there any useful suggestions that will safeguard this installation from potential failure for at least 10 years?

The number one thing to do prior to the installation of virtually any floor covering on a concrete slab is to test for the presence of elevated moisture vapor emission or pH levels.
It is essential to install a moisture vapor barrier coating if either of these conditions is above industry standards, but also a wise step to take as a precautionary measure to avoid potential problems in the future. Perhaps the greatest reason floor covering installations fail today is due to the breakdown of the adhesives used due to elevated levels of either condition.

The most robust moisture vapor barrier coatings for the installation of rubber flooring are made of epoxy resins and are a great preventive measure for any installation, regardless of size. Bostik is a global leader in the sale of moisture vapor emission control systems and has a choice of two-component coatings available. Bostik’s Durabond D-250 Moisture Vapor Barrier Coating and D-261 Extreme Moisture Vapor Barrier Coating are both high performance, roller-applied, epoxy coatings that meet LEED credit MR 4.2 Low-Emitting Materials – Paints & Coatings. Both coatings have VOC contents well below the 100 g/L LEED limit for this category of waterproofing sealers. These coatings have minimal odor, dry rapidly and contain Bostik’s Blockade™ antimicrobial protection. Either coating can be used in conjunction with Bostik’s complete line of Durabond installation materials that include cement repair patches, self-leveling underlayments and adhesives. In fact, when used as part of a complete Bostik system, the installation can be warranted for a period of 10 years.